ELM-Microgrid-100

The ELM Microgrid Package is assembled to the highest standards in
a UL 508A shop. It is shipped as a self-contained unit and can be
installed outdoors or indoors.

MICROGRID 100 PACKAGE

Turnkey Solution

  • Factory Assembled
  • Pre-Engineered
  • Pre-Wired
  • Pre-Installed Safety
  • Labels
  • Pre-Tested

Managed Assets

  • Solar Generation
  • Distributed Battery
  • Storage
  • Diesel, Propane & Nat Gas Generators
  • CHP Systems
  • Grid Power

Communications & Control

  • 4G LTE Cellular
  • Ethernet and Wifi
  • Building Management
  • Generator Start and Stop
  • Optimal Power Forecasting
  • Power Reliability Alerts
  • Isochronous Generation Control

The Switch Advantage

  • Assembled in UL
  • 508A Shop
  • Turnkey Solution
  • Indoor and Outdoor
  • Enclosure Options
  • Includes Climate Control
  • and Fire Suppression
  • Includes Microgrid
  • Installation and
  • O&M Guides

Microgrid 100

TECHNICAL SPECIFICATIONS

Electrical Specifications
Single Phase Operation
AC Voltage 240 VAC
AC Input/Output Current 400 A
AC Output Power (discharge) 100kW
AC Input Power (charge) 100kW
Battery Capacity Range 205 kWh
AC Frequency (field settable) 50/60 Hz
Max AC Overcurrent Protection 375 A
Peak Efficiency 97.00%
AC Connection Split Phase 3 Wire L1, L2, N
Three Phase Operation
AC Voltage 480 VAC
AC Input/Output Current 250A
AC Output Power (discharge) 200kW
AC Input Power (charge) 200kW
Battery Capacity Range 205 kWh
AC Frequency (field settable) 50/60 Hz
Max AC Overcurrent Protection 250 A
Peak Efficiency 97.00%
AC Connection 3 Phase, 4 Wire
Equipment Specifications
External Dimensions (L x W x H) 84″ x 60″ x 81″
Weight 7500 lbs.
Lifting Provisions Fork Lift Slots
Paint Tested 1000 Salt Hour Spray
Fire Suppression Hybrid – 3M Novec 1230
Dry Pipe Water
Handles Reversable/ Lockable
Temperature Range -20°C to 50°C
Control Software
ELM Autonomous Microgrid Site Control System
Access & Alerts on Desktop & Mobile 24/7
Asset Monitoring System Level & Individual
Individual Microgrid Component Pages
Local HMI IP 65 Touchscreen
Communications: WiFi, Ethernet, Cellular
Operation Parameters
Islanded MicroGrid Off Grid
Applications
Grid Tied MicroGrid Peak Shaving
Back Up Power
Demand Response
Distributed Generation Time of Use Operation
Key System Components
NEMA 4 Enclosure
Bi Directional Storage Inverter
DC Disconnect – (Battery)
AC Disconnect (Inverter)
AC Disconnect (Utility Interconnect)
AC Circuit Breaker (Load Panel)
PV Disconnect
Transformer
Climate Controls
Certifications
Batteries UL 1973
Inverter UL 1741 SA
System UL 9540 (In Process)

ELM’s Microgrid 100/250 can be configured for single or 3-phase operation via firmware updates to the inverter. Both single phase and 3-phase operation do require an external step down transformer which is included in the system package. For higher power or storage requirements multiple systems can be paralleled and additional energy storage containers can be added. Please contact ELM for more details.

2933 Eisenhower, Suite 120 | Carrollton, TX 75007
p 214.533.8712 | w www.elmllc.com | e sales@elmllc.com

Contact Form
close slider

    Contact Us